Title

TEST3Copy of record Vicmap Elevation - Contour Line (10 and 20 metres) created at 2022-08-12T02:17:44Z 

Alternate title

EL_CONTOUR 

Purpose

Vicmap provides an accurate representation of natural and man made features across Victoria, at a capture scale of 1:25,000. It is used in a variety of applications, particularly in emergency services, natural resource management, planning and development, and digital map publication. 

Supplemental Information

Related Documents: None http://www.delwp.vic.gov.au/vicmap > Vicmap Elevation 

Status

Completed  

Horizontal Accuracy

25m  

Code

4283 

Maintenance and update frequency

Irregular  

Topic category

• Elevation
• Environment
• Geoscientific information

Use limitation

Access through www.delwp.vic.gov.au/vicmapdata or Vicmap Data Service Providers www.delwp.vic.gov.au/vicmapdsp or DataVic www.data.vic.gov.au 

Classification

Unclassified  

Statement

Dataset Source: The line work and points were derived from the Vicmap Digital Topographic (VDT) map base coordinated by LIG. VDT evolved from Victoria's printed 1:25,000 Topographic Map Series program together with the need to supply a control framework for the creation of the rural Digital Cadastral Mapbase. The capture scale is 1:25,000 Statewide and the coverage, except for minor border issues is also statewide. Dataset Originality: Primary 

Description

Collection Method: Conversion of existing mapping, digital stereo capture 

Description

- Conversion of existing mapping - compilation conversion 30% and repromat conversion 50% - digital stereo capture - 20% -The majority of the conversion of existing mapping and approximately 30% of the digital stereo capture were outsourced to private contractors and the remainder was captured in house. Contractor's primarily scanned and vectorised existing repromat with a small amount of hand digitising done in some instances. 

Classification

Unclassified  

Attribute Quality

Comments

The allowable error in attribute accuracy ranges between a 1% allowable error to 5% error. For this product attribute accuracy ranges between a 1% to 5% error. For this product attribute accuracy is a measure of the degree to which features and attribute values of spatial objects agree with the information on the source material. 

Positional Accuracy

Comments

The planimetric accuracy attainable will be the sum of errors from three sources:the positional accuracy of the source material, errors due to the conversion process, errors due to the manipulation process. For topographic base derived data this represents an error of 8.3m on the ground for 1:25,000 data. A conservative estimate of 10m for the standard deviation will be used in any data quality information. Alternate and equal ways of expressing this error are: not more than 10% of well-defined points will be in error by more than 16 m. The worst case error for the data is +/- 30 m. For vertical positional accuracy of points determined from contours there is an expectation that the elevation accuracy (standard deviation) will be half the value of the contour interval. 

Conceptual Consistency

Comments

The allowable error in attribute accuracy ranges between 1% to 5% error. Logical consistency is a measure of the degree to which data complies with the technical specification. The test procedures are a mixture of scripts, microstation MGE program and on-screen visual checks. 

Missing Data

Comments

Complete 

Excess Data